Skip to content

All About the Oil Filter Housing Gasket

Gaskets for the housing of the oil filter? If your engine is the engine of your vehicle engine oil is blood. The more clean the blood is, the healthier your heart. So long as the oil stays in good condition the engine will be in good shape. It is very easy to let engine oils get dirty.

They are not just lubricating the engine, they’re as well protecting and cleaning it. Anything left after combustion is carried away by the oil in your engine. When you consider that your engine produces more than 1000 combustions per minute the engine oil you use should be as thick as toothpaste. However, they will remain free of contaminants for more than 30000 miles.

It is because of a component, called an oil filter. Filters in oil are regularly filtered by engine oil when it travels through the engine. It is because of oil filters that you’re in a position to achieve the same mileage prior to the need for an oil change. Because oil filters are used regularly, they last for between 5000 and 7000 miles.

That’s why they’re designed so that they are simple to access and are able to be changed on the fly. This is all thanks to Oil Filter Housing. Click here for 2.0 TDI oil filter housing.

What exactly is Oil Filter Housing?

The housing for the oil filter is a structure used for oil filters in the engine compartment. It links the filter to the engine, by holding it to a specific location. Simply put The housing for the oil filter is an appropriate location where the filter can complete its work.

It’s also located just next to the cover for the engine which makes it easy to reach anytime it is needed. Why should I make this sound so vital?

Back in the 60s, if you had to replace your oil filters , you had to remove the entire canister, then replace it after replacing an O-ring, and including extra oil into the canister.

Comparing that to today, your home does not just make filtering easy to access, but they are also practical and efficient, and saves you money on labor and provides the safest filtration, without leakages.

These housings are very sturdy and because they are located in of the engine, they’re very robust. This is the reason you typically experience leaks because of bad engine oil or blocked filters. However, there is one factor that can make the oil filter housing vulnerable. It is gaskets.

Why is gasket needed?

A gasket is a seal used to seal the filter, and to prevent spillage of oil. For both internal and external kinds of oil filters that are attached on the motor, gasket will be essential to seal the filter completely. Without gaskets, and unless they are secured with adhesives, frequent leaks of oil is a regular occurrence and the process of changing oil filters will take a long time.

To avoid this, we invented gaskets. But, over time the gasket becomes brittle and begins to show cracks everywhere. The result is a small leaks and if they are not taken care of during regular maintenance could easily result in an oil spill that is large in size.

So how Do You Know You Have an Incorrect Gasket?

How do you spot Bad Oil Filter Housing Gasket?

If you are trying to determine the signs of a condition, you look for signs. Similar to when you want to determine if you have a damaged gaskets in the oil filter housing You look for oil leaks. Oil leaks are a thing which isn’t often seen particularly in modern automobiles. Therefore, if you see oil-stained areas under your vehicle after you have parked it in one spot for at most 2 or 3 hours, it is an indication of a bad gasket.

Another method to identify it is by looking at the engine oil indicator. The indicator on the engine oil is designed to alert you of a problem with your engine oil. It does this by keeping track of the oil pressure or the volume.

If you have a gasket that is not working, you’ll suffer from leaks of oil. Leaks will lead to lower oil volume or changes in pressure within the engine i.e. “Lights on”. In this situation, it is best to get your engine examined immediately.

However, is it really necessary to resolve the issue immediately?

Gasket for the Oil Filter Housing Replacement

Leakage within your oil filter housing isn’t something to be considered lightly. We’ve already learned that it is the link between your oil filter with the engine oil. If your filter isn’t functioning correctly your engine oil is likely to be dirty, leading to a performance drop.

Leakage inside your housing is an increase in oil levels. This puts more stress of your motor, leading it to overheat and leave gaps everywhere, resulting in poor combustion. In the end you’re dealing with an extremely unstable engine that could sustain lasting damage in any moment. If you’re not wealthy, fixing the leak must be the top priority.

How do I replace the gaskets in the housing of the oil filter?

The replacement of the gasket in the housing for your oil filter is a straightforward two-step procedure but you’ll need to take your hands “wet”. First, you’ll need remove the housing for your oil filter, then replace your gasket before screwing it back into place.

To begin, remove the bonnet and find the housing for your oil filter. It should be located near the cover for your engine.

After you’ve found the gasket, simply remove the cap (cap) to the point that it’s loose enough to lift by hand. This will allow you to move all the oil to the engine, so you don’t make a mess while taking off the housing housing for the oil filter.

After 20 seconds, begin taking off the bolts connecting the oil filter housing and the engine. In most cases, you will find three bolts with different dimensions. Find the bolts and remove each one at a time. Be sure to take note of which bolts go into the socket.

After you’ve removed all bolts, lay some clean clothes underneath in the area around and under the housing. Remove the two hoses connecting to the side, and then slowly pull the housing for the oil filter out.

When you pull the housing away you’ll be in a position to see the gasket that is attached to it. The next step is to remove the gasket from. Use a pointed tool to dig one end to take it out of the seal.

After the gasket has been removed take the gasket off and clean it using a clean cloth. The same procedure is applied to the other component attached to engine.

Now is the time to install your new gasket. Unwrap the gasket to match the sides, and it will fit perfectly.

After the gasket has been replaced, put the house for the oil filter back into place. Connect the two hoses on either side back to the housing and then close the cap(lid) of the housing housing of the filter. Be sure to add coolant and oil as you may have lost some during the process.

Then, begin your engine for a last check, and you’ll be in good shape.